Fasteners

Nuts

Nut Bolt, Duplex Steel Nut, Steel Fasteners, Stainless Steel Steel Nut, Alloy Steel Steel Nut, Carbon Steel Steel Nut, Duplex steel Steel Nut.

Bolts

The major grade used in stainless steel bolts: 200 series, 300 series, and 400 series. We also stock Steel Fasteners. Quality Steel Bolts / Nut Bolt from STEEL POINT INDUSTRIES  meet the strictest requirements and provide maximum safety for reliable operations without breaking down. Known for its impeccable finish, accurate dimensions and robust design.

Screws

The major grade used in stainless steel screws: 200 series, 300 series, and 400 series. We also stock Steel Fasteners. Quality Steel Screw from STEEL POINT INDUSTRIES meet the strictest requirements and provide maximum safety for reliable operations without breaking down. Known for its impeccable finish, accurate dimensions and robust design.

Washers

The major grade used in stainless steel washers: 200 series, 300 series, and 400 series. We also stock Steel Fasteners. Quality Steel Washers from STEEL POINT INDUSTRIES  meet the strictest requirements and provide maximum safety for reliable operations without breaking down. Known for its impeccable finish, accurate dimensions and robust design.

PTFE Coated Fasteners

PTFE coated fastener’s provides exceptional corrosion resistance, low coefficient of friction, consistent tensioning and subsequent ease of installation and removal.

Extensive testing and field use have proven that the future of coated fastener’s lies with Fluoropolymer coatings. Previously hot dip, galvanized, cadium or zinc plated fastener’s were considered the standard. But these coatings could not stand up to the corrosive atmospheres prevalent in many industries. The most widely used application is on B7 studs with 2H nuts.

Dramatic improvements in efficiency, life expectancy and corrosion resistance are claimed to be imparted to Nut and Bolt connectors by the application of a low friction PTFE coating. PTFE coated connectors have out-performed all others in aggressive any noticeable effect.

Fasteners Application

American Made. It’s our manufacturing heritage, our focus going forward, and our commitment to you. It’s a part of all the industries STEEL POINT INDUSTRIES  serves, and these are the segments we know the best.

Fasteners Manufacturing Specifications

ASTM – Originally known as the American Society for Testing and Materials, was formed over a century ago, and is now one of the largest voluntary standards development organizations in the world, and is a trusted source for technical standards for materials, products, systems, and services. Known for their high technical quality and market relevancy, ASTM International standards have an important role in the information infrastructure that guides design, manufacturing and trade in the global economy.

ASME – American Society of Mechanical Engineers is one of the oldest and most respected standards developing organizations (SDO) in the world. It produces and maintains approximately 600 codes and standards, covering a multitude of technical areas including boiler components, elevators, hand tools, fasteners, and machine tools to name just a few.

FF-S-85 – Federal Specifications for Screws, Cap, Slotted and Hexagon Head

FF-S-92 – Federal Specifications for Machine Screws.

MIL-S-1222 – Military Specifications for Studs, Bolts, Hex Cap Screws, and Nuts.

MIL-DTL-1222 – Military Specifications for Studs, Bolts, Screws, and Nuts for Applications Where A High Degree of Reliability is Required.

Fasteners Manufacturing Specifications

Manufacturer & stockists of high integrity Fasteners of Marine Grade (316/316L), Best price

Buy comprehensive Variety of Fasteners of Marine Grade (316/316L) with discounted price, dimensions range from M3 to M100 and quantities from 1 to 90,000.

Type 316 is the second most common grade (after 304); for food and surgical uses; alloy addition of molybdenum prevents specific forms of corrosion. It is also known as marine grade stainless steel due to its increased resistance to chloride corrosion compared to type 304

DIN Fastener

DIN-Cap nuts

DIN-Castle nuts

DIN-Clevis pins

DIN-Clevis pins

DIN-Knurled nuts

DIN-Shim rings

DIN-Slotted head screws

DIN-Square head bolts

DIN-Square nuts

DIN-Tapping screws

DIN-Thread forming screws

DIN-Washers for use in structural steelwork

DIN-Weld nuts

DIN-Weld screws

DIN-Wood screws

DIN-Cross recessed head screws

DIN-Double end studs

DIN-Pins

DIN-Nails

DIN-Hexagon head bolts and screws

DIN-Hexagon head bolts and screws for use in DIN-Structural steelwork

DIN-Drilling screws with tapping screw thread

DIN-Split pins

DIN-Plain washers

DIN-Hexalobular head bolts

DIN-Prevailing torque type nuts

DIN-Sepcial washers

DIN-Miscellaneous bolts and screws

DIN-Miscellaneous nuts

DIN-Retaining rings

DIN-Keys

DIN 1-100

DIN 1 – Taper Pins

DIN 7 – Dowel Pins

DIN 84 A – Slotted Cheese Head Machine Screws

DIN 85 A – Slotted Pan Head Machine Screws

DIN 93 – Tab Washers With Long Tab

DIN 94 – Cotter Pins

DIN 95 – Slotted Oval Head Machine Screws

DIN 96 – Slotted Round Head Wood Screws

DIN 97 – Slotted Flat Head Wood Screws

DIN 101-200

DIN 125 A – Flat Washer Without Chamfer

DIN 125 B – Flat Washer With Chamfer

DIN 126 – Grade C Flat Washer Without Chamfer

DIN 127 A – Split Lock Washer With Bend Ends

DIN 127 B – Split Lock Washer With Flat Ends

DIN 128 A – Split Spring Washers, Curved

DIN 128 B – Split Spring Washers, Waved

DIN 137 A – Spring Washer, Curved

DIN 137 B – Spring Washer, Waved

DIN 186 A – Tee-Head Bolts With Square Head

DIN 188 – Tee-Head Bolts With Double Nip

DIN 193

DIN 196

DIN 301-400

DIN 315 – Wing Nuts

DIN 316 – Wing Screws

DIN 401-500

DIN 404 – Slotted Drilled Fillister Head Screws

DIN 417 – Slotted set screws with full dog point

DIN 427 – Slotted Headless Screws

DIN 431 – Jam Nut, Hexagonal

DIN 432 – External Tab Washer

DIN 433 – Flat Washer With Reduced O.D.

DIN 434 – Square Bevel Washer: 8%

DIN 435 – Square Bevel Washer: 14%

DIN 436 – Square Washer

DIN 438 – Slotted set screws with cup point

DIN 439 A – Hexagon Nuts – 0,5d Unchamfered

DIN 439 B – Hexagon Nuts – 0,5d Chamfered

DIN 444 A – Eye Bolts

DIN 462 – Internal Tab Washers

DIN 463 – Tab Washers With Long And Short Tab

DIN 464 – Knurled Thumb Screws

DIN 466 – Knurled Nuts, Full

DIN 467 – Flat Knurled Nuts

DIN 470 – Sealing Washers

DIN 471 – External Retaining Rings

DIN 472 – Internal Retaining Rings

DIN 478 – Square Head Bolts

DIN 479 – Square Head Bolts

DIN 480 – Square Head Bolts

DIN 501-600

DIN 525 – Weld Studs With Hexagon Nuts

DIN 529 A – Anchor Bolts (Stone Bolt)

DIN 529 B – Anchor Bolts (Stone Bolt)

DIN 529 C – Masonry Bolts With Hexagon Nuts

DIN 529 D – Anchor Bolts (Stone Bolt)

DIN 529 E – Foundation Bolts With Hexagon Nuts

DIN 529 F – Anchor Bolts (Stone Bolt)

DIN 529 G Bolt

Din 546 – Slotted Round Nut

DIN 547 – Round nuts with drilled holes in one face

DIN 548 – Round nuts with set pin holes in side

DIN 551 – Slotted Set Screws With Flat Point

DIN 553 – Slotted Set Screws With Cone Point

DIN 555 – Hexagon Nuts – 0,8d

DIN 557 – Square Nuts

DIN 558 – Fully Threaded Maching Bolts

DIN 562 – Square Thin Nuts

DIN 571 – Hexagon Lag Screws

DIN 580 – Lifting Eye Bolts

DIN 582 – Lifting Eye Nuts

DIN 601-700

DIN 601- Hexagon head bolt with nut

DIN 603 Mu – Carriage Bolts With Hexagon Nuts

DIN 604 – Flat Countersunk Nip Bolts With Hex Nuts

DIN 605 – Flat Countersunk Square Neck Bolts

DIN 607 – Round Head Nip Bolts With Nuts

DIN 608 – Countersunk Square Bolts (Short Neck)

DIN 609 – Hex Fitting Bolts w/long Threaded Portion

DIN 610 – Hex fitting Bolts w/short Threaded Portion

DIN 653 – Flat Knurled Thumb Screws

DIN 660 – Round Head Rivets

DIN 661 – Countersunk Head Rivets

DIN 701-800

DIN 705 A – Shaft Collars

DIN 801-900

DIN 835 Fo – Studs, Tap Ends – 2d

DIN901-1000

DIN 906 – Hexagon Socket Pipe Plugs

DIN 908 – Hexagon Socket Screw Plugs

DIN 910 – Hexagon Head Screw Plugs

DIN 911 – Hexagon Socket Screw Keys

DIN 912 – Socket Head Cap Screws

DIN 913 – Socket Set Screws With Flat Point

DIN 914 – Socket Set Screws With Cone Point

DIN 915 – Socket Set Screws With Dog Point

DIN 916 – Socket Set Screws With Cup Point

DIN 917 – Hexagon Cup Nuts – Low Pattern

DIN 920 – Slotted Pan Head Screws, Small Head

DIN 921 – Slotted pan head screws with large head

DIN 923 – Slotted Pan Head Screws With Shoulder

DIN 927 – Slotted Shoulder Screws

DIN 928 – Square Weld Nuts

DIN 929 – Hexagon Weld Nuts

DIN 931 – Hexagon Cap Screws Partially Threaded

DIN 933 – Hexagon Cap Screws Fully Threaded

DIN 933 Sz – Hexagon Cap Screws With Slot

DIN 934 – Hexagon Nuts – 0,8d

DIN 935 – Castle Nuts

DIN 936 – Hexagon Jam Nuts

DIN 937 – Hexagon Thin Slotted And Castle Nuts

DIN 938 – Studs – Metal end ≈ 1 d.htm

DIN 939 – Studs, Tap End – 1,25d

DIN 960 – Hex Cap Screws, Metric Fine Thread – Part Thread

DIN 961 – Hex Cap Screws, Metric Fine Thread – Full Thread

DIN 963 A- Slotted Flat Head Machine Screws

DIN 964 A- Slotted Oval Head Machine Screws

DIN 965 A – Cross Recessed Flat Head Machine Screws

DIN 966 A – Cross Recessed Oval Head Machine Screws

DIN 980 V – Self-Locking Nuts; All Metal Conctruction

DIN 982 – Self- Locking Nuts w/nylon Insert: Heavy Series

DIN 985 – Self Locking Nuts w/locking Insert: Standard Series

DIN 986 – Self Locking Domed Cap Nuts With Nylon Insert

DIN 988 – Shim Washers

DIN 1001-2000

DIN 1052

DIN 1440 – Flat Washers With Clevis Pins, Medium

DIN 1441 – Flat Washers For Clevis Pins, Coarse

DIN 1473 – Grooved Pins Full Length Paralled Grooved

DIN 1475 – Grooved Pins Third Length Center Grooved

DIN 1476 – Round Head Grooved Pins

DIN 1477 – Flat Countersunk Head Grooved Pins

DIN 1480 – Turnbuckles

DIN 1481 – Spring Ppins, Heavy Duty

DIN 1587 – Hexagon Domed Cap Nuts, Full Pattern

DIN 1804 w – Slotted Round Nuts

DIN 2001-3000

DIN 2093 A,B,C – Dics Springs (Belleville Type)

DIN 2338 – Parallel Pin

DIN 2339

DIN 2509 – Double end studs

DIN 2510

DIN 3001-3999

DIN 3570 – U Bows U Bolts

DIN 6001-7000

DIN 6319 – C D G Spherical washers and conical seats

DIN 6325 – Parallel Pins Hardened

DIN 6332 – Grub screws with thrust point

DIN 6334 – Hexagon Nuts – 3d

DIN 6796 – Conical Spring Washers (Belleville Type)

DIN 6797 A+J – Internal/External Tooth Lock Washers

DIN 6797 AZ – Tooth Lock Washers (Type AZ)

DIN 6797 IZ – Tooth Lock Washers (Type JZ)

DIN 6797 AZV – Tooth Lock Washers (Type AZV)

DIN 6798 A+J – Serrated Lock Washers

DIN 6798 AZV – Serrated Lock Washers (type AZV)

DIN 6798 V – 90degree Countersunk Serrated Lock Washers

DIN 6799 – Circlips For Shafts

DIN 6885 A – Parallel Keys, Round Ended

DIN 6885 B – Parallel Keys, Square Ended

DIN 6911 – Hexagon Socket Screw Keys With Pilot

DIN 6912 – Low Head Socket Cap Screws With Pilot

DIN 6914 – Hex Bolts For High Strength Struct. Bolting

DIN 6915 – Hex Nuts For High Strength Struc. Bolting

DIN 6916 – Washers For High Strength Structural Bolting

DIN 6917 – Square taper washer for -sections 14%

DIN 6918 – Square taper washer for U-sections

DIN 6921 – Hex Flange Bolts

DIN EN 1665 Hexagon bolts with flange – heavy series(Replace DIN 6922)

DIN 6923 – Hexagonal Flange Nuts

DIN 6924 Prevailing torque type hexagon nut with nylon insert ISO 7040

DIN 6925 – Prevailing torque type hexagon nut all metal

DIN 6926 – Self-Locking Hex Flange Nuts: Non Metallic Insert

DIN EN 1663 – Prevailing torque type hexagon nuts with flange with non-metallic insert

DIN 7001-8000

DIN 7338 – Rivets for brake linings and clutch linings

DIN 7343 – Coiled Pins, Medium Duty

DIN 7349 – Flat Washers With Large Ext. Diameter

DIN 7504 – N P K head self drilling screws

DIN 7968 – Hexagon fit bolts with hexagon nut for steel structures

DIN 7969 – Slotted countersunk head bolts with hexagon nut for steel structures

DIN 7970 – Tapping screw threads

DIN 7978 A – Taper PIns With Internal Thread

DIN 7979 D – Dowel Pins With Internal Thread

DIN 7980 – Hi-Collar Lock Washers

DIN 7981 B(BZ) – Cross Recessed Pan Head Tapping Screws

DIN 7982 B – Cross Rec. Flat hd Tapping Screws, hd Angle 80

DIN 7983 B – Cross Rec. Oval hd Tapping Screw, hd Angle 80

DIN 7984 – Socket Low Head Cap Screws

DIN 7985 A – Cross Recessed Pan Head Machine Screws

DIN 7985 Z1 – Cr. Rec. Pan Head Screws w/captive Flt. Washer

DIN 7985 Z4 – Cr. Rec. Pan Head Screws w/captive l/washer

DIN 7989 A – Washers For Steel Constructions

DIN 7991 – Flat Socket Head Cap Screws

DIN 7997 – Cross recessed countersunk head wood screws

DIN 7998 – Threads and Thread Ends for Wood Screws

DIN 9001-9999

DIN 9021

DIN 9250 Safety lock serrate washer

DIN EN 22339 – Unhardened Taper Pins (Replace DIN 1)

IFI Fastener (ANSI , ASME)

ASME B18.15 Forged Eyebolts (Type 1 & Type 2)
ASME B18.2.1 Square Head Bolts
ASME B18.2.1 Hex Bolts and Heavy Hex Bolts
ASME B18.2.1 Askew Head Bolts
ASME B18.2.1 Hex Cap Screws
ASME B18.2.1 Hex Flange Screws
ASME B18.2.1 Lobed Head Screws
IFI 115 Flange 12-Point Screws
ASME B18.5 Round Head Bolts
ASME B18.5 Round Head Square Neck Bolts
ASME B18.5 Round Head Short Square Neck Bolts
ASME B18.5 Round Head Ribbed Neck Bolts
ASME B18.5 Round Head Fin Neck Bolts
ASME B18.5 Step Bolts
ASME B18.5 Countersunk Bolts and Slotted Countersunk Bolts
ASME B18.5 114-deg Countersunk Square Neck Bolts
ASME B18.5 Flat Countersunk Head Elevator Bolts
ASME B18.5 T-Head Bolts
ASME B18.9 No. 3 Head Plow Bolts Round, Countersunk, Square Neck
ASME B18.9 No. 7 Head Plow Bolts Round, Countersunk, Reverse Key
ASME B18.9 No. 4 Repair Head Plow Bolts(Square Head, Countersunk)
ASME B18.9 No .6 Repair Head Plow Bolts(Round, Countersunk, Heavy Key)
ASME B18.10 Oval Neck Track Bolts
ASME B18.10 Elliptic Neck Track Bolts
IFI 136 Double End Studs
IFI 136 Interference-Thread Double End Studs
IFI 136 Bent Studs
IFI 148 Type U3 Projection Weld Studs
IFI 148 Type T3 Projection Weld Studs
IFI 148 Type TD Projection Weld Studs
IFI 148 Type UR Projection Weld Studs
IFI 148 Heavy Duty Type US3 Projection Weld Studs
IFI 148 Type UC4 Projection Weld Studs
IFI 148 Type TC4 Projection Weld Studs
IFI 148 Type TUS3 Projection Weld Studs
ASME B18.6.2 SLOTTED FLAT COUNTERSUNK HEAD CAP SCREWS
ASME B18.6.2 SLOTTED ROUND HEAD CAP SCREWS
ASME B18.6.2 SLOTTED FILLISTER HEAD CAP SCREWS
ASME B18.2.1 Square Head Bolts
ASME B18.6.2 SLOTTED HEADLESS SET SCREWS
ASME B18.2.5M Metric 12-Point Flange Head Screws
ASME B18.6.3 Slotted Flat Countersunk Head Screws
ASME B18.6.3 Recess Flat Countersunk Head Screws
ASME B18.6.3 Slotted 100-deg Flat Countersunk Head Screws
ASME B18.6.3 Recess 100-deg Flat Countersunk Head Screws
ASME B18.6.3 Slotted Close Tolerance 100-deg Flat Countersunk Head Screws
ASME B18.6.3 Recess Close Tolerance 100-deg Flat Countersuk Head Screws
ASME B18.6.3 Slotted Oval Countersuk Head Screws
ASME B18.6.3 Recess Oval Countersuk Head Screws
ASME B18.6.3 Slotted Undercut 82-deg Flat Countersuk Head Screws
ASME B18.6.3 Recess Undercut 82-deg Flat Countersuk Head Screws
ASME B18.6.3 Slotted Undercut Oval Countersuk Head Screws
ASME B18.6.3 Undercut Oval 82-deg Countersunk Head Screws
ASME B18.6.3 Flat Countersunk Trim Head Screws
ASME B18.6.3 Recess Dimensions For Countersuk Trim Head Screws

Carbon Steel Fasteners

We are one of the leading Manufacturer, Exporter and Supplier of High quality Carbon Steel Fasteners in mumbai, India. We also offer a complete range of Carbon Steel Fasteners such as Bolts, Nuts, Washer, Screw, threaded rod and stainless screws etc. These Carbon Steel Fasteners are widely used in various application industry. These Carbon Steel Fasteners are available in different size, shapes, grades, specification & thickness as per the clients requirments. We provide products as per DIN, ANSI, JIS standards.

Monel

STEEL POINT INDUSTRIES can provide a wide variety of Monel fasteners including; Monel nuts, Monel bolts, sockets, washers and more Monel Fasteners. If we do not have your Monel Fasteners in stock (Inch or Metric) we can have these manufactured to your specification.

Material Notes:

Compared to steel, Monel is very difficult to machine as it work-hardens very quickly. It needs to be turned and worked at slow speeds and low feed rates. It is resistant to corrosion and acids, and some alloys can withstand a fire in pure oxygen. It is commonly used in applications with highly corrosive conditions. Small additions of aluminium and titanium form an alloy (K-500) with the same corrosion resistance but with much greater strength due to gamma prime formation on aging. Monel is typically much more expensive than stainless steel.

Monel alloy 400 has a specific gravity of 8.83, an electrical conductivity of approximately 3.4% IACS, and (in the annealed state) a hardness of 65 Rockwell B.[3].

Trade Name	ASME P Group	ASTM/AISI Steel type	UNS
Monel 400		B 127, B 164	N04400
Monel 401			N04401
Monel 404		B 164	N04404
Monel K-500		B 865	N05500
Monel R-405			N04405

Inconel

Inconel® fasteners, like Inconel 600, 601, 625, 686, 718 & 725 fasteners, are a family of nickel-chromium-molybdenum alloys used for their high strength at elevated temperatures and good corrosion resistance. Because of its high thermal stability, Inconel can be used in service temperatures ranging from cryogenic to 2200°F (982°C). The high alloy content of Inconel fasteners enable it to withstand a wide variety of severe corrosive environments. In mild environments, such as the atmosphere, sea water, neutral salts, and alkaline media, there is almost no attack to Inconel fasteners. In more severe corrosive environments the combination of nickel and chromium provides resistance to oxidizing chemicals, whereas the high nickel and molybdenum contents supply resistance to nonoxidizing environments.

Because Inconel fasteners offer a good balance of corrosion resistance, temperature stability, toughness and strength they are often a material of choice for chemical processing, aerospace, marine, electronics and oil & gas.

Carbon steel fasteners

We are one of the leading Manufacturer, Exporter and Supplier of High quality Carbon Steel Fasteners in mumbai, India. We also offer a complete range of Carbon Steel Fasteners such as Bolts, Nuts, Washer, Screw, threaded rod and stainless screws etc. These Carbon Steel Fasteners are widely used in various application industry. These Carbon Steel Fasteners are available in different size, shapes, grades, specification & thickness as per the clients requirments. We provide products as per DIN, ANSI, JIS standards.